Button - snap closure

1) The difference between the squeezing button and the sewing button is the difference in the pulling force (snapping force). The squeezing button adopts the spring wire to control the pulling force. The pulling force value is relatively small and generally does not change. The sewing button adopts the coil to control the pulling force, and the pulling value is relatively low. Large and optional spring coils with different wire diameters can be used to adjust the pull force, so it can be used for baby carriages, golf bags, sports equipment. . . Such occasions require higher tension. 2) Three different bottoms depending on the requirements of the guests and the size of the button. The jewels are commonly used in #484 (14MM), #486 (12MM), and #488 (10MM). The sewing buttons are commonly used in #405 (13.5MM), #406 (11MM) and #408 (9MM). 3). The style changes will be on the button surface (including material, size, color, LOGO), coupled with the corresponding bottom three. The four common materials for the button surface are copper, alloys, nylon, and rubber. (The copper surface and the alloy surface are made of metal, nylon and rubber are plastic materials, nylon is rigid, and rubber is soft.) 4). From the production process, the urgency button surface is divided into two types: one is a stamping piece, one Die castings, copper buttons for the stamping parts, alloy and plastic material for the button die castings; due to different processes, alloys and copper than to make different styles and styles of urgency button. 5). This type of button is widely used and can be used in general except for knitted fabrics. It is recommended that the fabric of the bottoming piece be opened before the button is pressed, otherwise the best effect can not be achieved; If the button cannot be adjusted at the best position, it will also cause button deformation, looseness, and non-matching. 6). The maximum requirement of the squeezing button is the control of the pulling force, and the prerequisite is the selection of the copper material and the product size. control. How to distinguish the pros and cons of the product? Can distinguish from the appearance shape, plating color, fastening performance, weight comparison and other aspects. A) The appearance should be smooth and smooth, without embossing, scratching, deformation, burrs, etc. The pattern of the LOGO should be clear and complete. The button surface should give people a feeling of fullness and three-dimensionality. b) performance in addition to the pull value in the standard range, the buckle and pull out should be smooth and no tight astringent feeling, after the closure of the male and female buckles should be no obvious shaking face, after the feet are not broken feet, cracked The open phenomenon (except for customers requesting flowering riveting) also needs to meet the requirements.

Want to learn more about buttons: accessible


Yoga Leggings

Yoga leggings are also made of elastic materials, usually using bamboo fiber materials, which can not only fit closely to the lower body, but also provide a comfortable feeling when worn, and can better highlight the contour of the legs. However, when choosing yoga leggings, not only should their comfort be considered, but also their durability, fit, and style.

Yoga Leggings ,Yogalicious Leggings,Black Yoga Pants,Yoga Pants With Pockets

T&H INTERNATIONAL TRADING LIMITED , https://www.th-tradenet.com