Public bidding for fire equipment of Yuzhong District Fire Brigade

HC Fire Network News 2016 China Fire Safety Industry Conference (CFIC2016) Registration Registration

Tender notice

Entrusted by the Purchasing Office of the Yuzhong District People's Government of Chongqing Municipality, our center will purchase a batch of fire-fighting equipment through public bidding (project name: Public bidding for fire-fighting equipment of Yuzhong District Fire Brigade). A qualified supplier is welcome to register. (The following qualifications are available at the time of registration)

1. An enterprise that meets the requirements of Article 22 of the Government Procurement Law.

2. Enterprises with independent legal personality and relevant business scope.

3. Examine the valid business license, tax registration certificate, original organization code certificate, and copy the fresh seal.

4. The identity certificate of the legal person, the identity certificate of the authorized person and the authorized person in the bidding unit for the past three months, the company guarantees the original (the original material of the above materials, a copy of the fresh seal) and the original bidding form and authorization letter.

phone

Contact: Teacher Wang

Deadline for registration: 11:00 am, August 17, 2016

Yuzhong District Public Resource Marketization Allocation Center, Chongqing

August 9, 2016

Yuzhong District Fire Brigade Fire Equipment Open Bidding Procurement Announcement

The Yuzhong District Public Resource Marketization Allocation Center was commissioned by the Yuzhong District Government Procurement Office to openly invite the fire brigade equipment of Yuzhong District. The qualified bidders are welcome to participate in the bidding.

I. Name of the bidding project: Public bidding for fire equipment of Yuzhong District Fire Brigade

Second, the relevant instructions for bidding and bid opening:

1. Registration time: August 10, 2016 - August 18, 2016, before 11:00 (Beijing time)

2. Place of bid: Yuzhong District Public Resource Marketization Configuration Center (hereinafter referred to as the Configuration Center) (2nd Floor, Xinmin Garden Office Building, No. 192 Heping Road, Yuzhong District, opposite Yuzhong District Government Building)

3. Bid time: August 30, 2016, 9:00-9:30 am

4. Bid Opening Time: August 30, 2016 at 9:30 am

5. Bid Opening Location: Configuration Center Bid Opening Room

Third, the relevant provisions:

1. The bids that exceed the deadline for bidding, are not sealed according to the regulations, or the bids that do not submit the effective full bid bond in accordance with the “Tender Documents” will not be accepted by our center.

2. The time for submitting the bid bond: before 16:00 on August 18, 2016. Subcontract one pays 44,000 yuan; subcontract second pays 26,000 yuan deposit to our center account. (Financial contact number, Luo Wei)

Fourth, contact:

1. The full name of the bidding and purchasing unit: Chongqing Yuzhong District Public Resource Marketization Allocation Center

2. Detailed address: 2nd Floor, Office Building, Xinmin Garden, No. 192, Heping Road, Yuzhong District

3. Zip code: 400010

4. Tel: (023) 63765497

5, fax: (023) 63765497

6. Contact: Teacher Wang

I. List of bidding projects:

Note: Suppliers who meet the requirements can choose one or two of the subcontracted bids, but the bid documents must be made separately.

Second, technical parameters:

Subcontract 1:

Fire helmet 462 top:

★ 1, for the safety of the head, face and neck. Technical performance meets the requirements of Fire Fighting Gear GA44.

★ 2, helmet shell made of imported polyetherimide (PEI) material, the shell is sturdy and durable, with anti-sharp goods impact, anti-corrosion, anti-heat radiation, high temperature resistance, high temperature state will not have droplets, With reflective, electrical insulation, lightweight and other properties. The protective mask lens material is imported polyether sulfone, the mask is impact resistant, no visual distortion, and has the functions of anti-fog, anti-scratch and good light transmission. The housing and lens are temperature resistant to 260 °C. The bidder shall provide proof of the material of the helmet.

3, the helmet structure is a four-stage shock absorption design, the top of the helmet shell is double-protected, the top of the helmet has multiple layers of fire-proof and thermal insulation buffer layer, the interior is fixed by three points, the knob type is designed, the cap ring can be adjusted tightly, and the center of gravity is stable and reliable. It is equipped with a demolition special neck protector. The material is flame retardant material plus PU coating, which is flame retardant, waterproof, soft and comfortable. The mandibular belt is made of flame-retardant fabric for easy adjustment.

4, the shell can be used with a variety of helmet lights. The side can be equipped with a professional explosion-proof lighting professional mold lamp holder. The color of the helmet is yellow, and the raw material is not painted.

5, each helmet should have a permanent mark, the cap badge is "07 type" armed police badge, should be firmly fixed in front of the helmet.

6. The supplier shall spray the mark as required by the purchaser.

★7. Provide a set of samples and the national fire protection equipment quality supervision and inspection center inspection report, 3C certification.

Firefighters protective clothing 462 sets:

First, the garment conforms to the GA10-2014 «Firefighter Fire Protective Clothing» standard,

★ Second, the overall protection performance TPP (CAL / CM2) ≥ 28, the entire set of clothing in line with the fire service 2014 standard weight ≤ 2.6KG.

Third, the main technical parameters:

1) Outer layer: NOMEXIIIA, weight: (210 ± 10) gsm, color is navy. Flame retardant performance: damage length ≤15mm, continuous burning time 0s; thermal stability energy: after (260±5)oC thermal stability energy test, the change rate along the warp and weft direction is ≤2%; shrinkage rate: along the warp and weft Shrinkage rate ≤2.5%; surface moisture resistance: immersion level ≥3; fracture strength: warp dry fracture strength ≥1000N, latitudinal dry fracture strength ≥950N; tear strength: warp tear strength ≥ 300N, latitudinal tear strength ≥250N; color fastness: washable stain, water resistance and light fastness are ≥4.

2) Waterproof and breathable layer: A flame-retardant PTFE film is covered with aramid non-woven fabric. Gram weight: (190±9.5) gsm, thermal stability: after (260±5) °C thermal stability test, the dimensional change rate along the warp and weft direction is ≤ 2%; shrinkage rate: the change rate along the meridional dimension ≤ 5 %, latitude ≤ 5%; hydrostatic resistance ≥ 50 kPa; moisture permeability ≥ 5000 g / (m2 • 24 h); oil repellency ≥ 3 levels.

3) Comfort layer: 50% Nomex, 50% flame retardant viscose blended fabric. Flame retardant performance: continuous burning time 0s, damage length ≤ 50mm; thermal stability: after (180 ± 5) °C thermal stability test, dimensional change rate in the warp and weft direction ≤ 2%; shrinkage rate: along the meridional size The rate of change is ≤ 3%, the latitude is ≤ 2%; the breaking strength: warp direction ≥ 400N, latitude ≥ 350N.

Excipient requirements:

1) Reflective marking tape: 5cm wide yellow silver yellow reflective tape, the performance meets the requirements of GA10-2014 standard.

2) Sewing thread: flame retardant performance, continuous burning time ≤ 2s; and the color matches the material of each layer and the reflective tape.

3) Hardware: no spots, nodules or sharp edges; after (260 ± 5) oC thermal stability test, can maintain its original function.

4) The zipper of the door sill adopts a resin zipper of not less than No. 8 and pulls smoothly, and the color matches the outer layer material.

5) Velcro tape: flame retardant, fast fastening, color matching the outer material.

Design Features:

1) The protective clothing is split up and down, and the inner layer is not detachable.

2) When the protective clothing is worn, the overlap between the top and the pants is greater than 20 cm.

3) The collar height of the protective suit is ≥10cm, and the protective buckle design is added at the neck and throat to prevent water from entering the threshold and improving the protection of the neck;

4) Protective clothing Velcro bonding design prevents water from entering the inner layer; cuffs can be tightened with a hook and loop fastener; the cuffs are covered with cowhide to improve wear resistance.

5) The protective suit has a fixed left chest and a large pocket on both sides of the lower leg. You can place more rescue tools.

6) A wide-shaped hook and loop fastener is provided at the foot of the protective trousers, which is convenient for wearing and removing the fire boots, and can tighten the trousers, and the foot is covered with cowhide to increase the wear resistance.

7) The shoulders, elbows and knees of the protective suit are reinforced with an outer fabric lining aramid felt.

8) Protective clothing is provided with reflective markings on important parts such as the front body, back, hem, and lower arm of the sleeve.

★ Fourth, provide a set of samples and national fire equipment quality supervision and inspection center inspection report, 3C certification.

462 pairs of fire gloves:

★ 1, in line with GA7-2004 "fire gloves" standard requirements.

2, mainly used for hand protection, using the outer layer, thermal insulation layer, waterproof and breathable layer, lining four-layer structure. The fabric is made of aramid 1313+ high-performance flame retardant fiber material, which has the properties of flame retardant, waterproof, breathable, anti-static and comfortable.

3. It consists of outer layer, waterproof layer, heat insulation layer and lining. A 360° reflective marking strip having a width of not less than 50 mm is sewn to the back of the hand.

4. Each glove should have a permanent washable label. The main contents include: standards, models and specifications for technical performance, name or trademark of the manufacturer, date of manufacture, production materials, inspection mark, and prohibited use.

★ 5, provide a sample of the sample and the national fire equipment quality supervision and inspection center inspection report, 3C certification.

Fire-fighting protective boots 462 pairs:

★ 1, in line with GA6-2004 "Firefighters fire protection boots" standard.

2, firefighters fire protection boots are used to protect the safety of firefighters' feet and lower limbs, with thermal insulation, waterproof, stab-resistant, anti-mite, anti-chemical and electrical insulation properties.

3, metal parts protect the toes, soles against stab wounds, piercing. The metal gasket has no corrosion after the corrosion test. The upper surface material is a rubber upper surface and a rubber sole surface, and the sole material is a rubber bottom.

★ 4, the main technical parameters:

Oil resistance: rubber surface, fence: ≥ 9.5%, outsole ≥ 5.5%

Anti-mite performance: static pressure, impact ≤ 21.0mm;

Puncture resistance: ≥1690N;

Cut resistance: will not be cut after the test;

Electrical insulation properties: breakdown voltage > 5000V;

Thermal insulation performance: ≥3 °C;

Radiation resistance: ≥6 °C;

Waterproof performance: no water seepage phenomenon;

Anti-slip performance: ≥15o;

Weight ≤ 3KG;

★5. Provide a sample and a test report of the National Fire Equipment Quality Supervision and Inspection Center and provide 3C certification.

Fire safety belt 462:

★1, in line with the standard requirements of GA494-2004 "Fire Falling Equipment".

2. Protective device for firefighters to climb and escape and self-rescue, made of polyamide fiber or polyester fiber and high-strength metal parts.

3. The webbing of the safety belt is a whole structure: it consists of a webbing, a pin buckle, a buckle and two pull rings.

4. The width of the webbing is 70mm±1mm. The suture of the safety belt is matched with the webbing and is easy to inspect with the naked eye; the suture interface and the stitching end seam are not less than 13mm; the line and stitch are straight and neat, no obvious bending or stacking, no jump stitch, open line, broken line. The buckle of the belt makes the length of the seat belt easy to adjust, fast to wear and free from looseness and slipping. When the temperature is high at 204 °C ± 5 °C, the safety belt does not melt or coke. All metal parts are corrosion resistant and antistatic.

★5. Provide sample and inspection report and 3C certification of National Fire Equipment Quality Supervision and Inspection Center.

Light fire safety rope 462:

★ 1, in line with GA494-2004 "fire fall protection equipment" standard.

2, made of DuPont silk, the safety rope is a continuous, sandwich rope structure, the main load-bearing part is made of continuous fiber. The minimum breaking strength of the light safety rope is ≥20KN, and when the load-bearing reaches 10% of the minimum breaking strength, the elongation of the safety rope is ≤3.5%;

The diameter of the safety rope should be not less than 9.5mm and less than 12.5mm, and the length is 20m.

High temperature resistance: When the high temperature resistance of 204 °C ± 5 °C, the safety rope will not melt and coke;

★3. Provide sample and inspection report of National Fire Equipment Quality Supervision and Inspection Center and provide 3C certification.

Fire waist axe 462:

★1, in line with GA630-2006 "Fire Axe" requirements.

2, with the ability to cut, can chisel, can be smashed and so on. The axe and axe handle are made of a single piece of steel.

3. The metal surface of the whole axe is smooth and smooth, and there are no defects such as cracks, burrs, dents or harmful impurities.

4. The flat blade, the shank and the axe shaft are on the same plane, and the parts of the whole axe are symmetrical to the plane.

★ 5, provide 1 sample.

Subcontract 2:

1540 fire-fighting integrated gas masks:

★ 1, in line with GB2890-2009 standard, provide relevant test reports.

★ 2, technical specifications:

The mask must be injection-molded, the surface is frosted, the close-fitting frame is reversed, the wearing is comfortable, the air tightness is good, and the five headbands can be adjusted at will and the elastic is suitable. The face screen is made of polycarbonate coating, which has good optical and impact resistance, and is equipped with a talker for clear sound transmission. With integrated canister, inspiratory resistance: ≤ 186 Pa (30 L / min); Expiratory resistance: ≤ 100 Pa (30 L / min); Total field of view: ≥ 75%, binocular field of view: ≥ 60%.

★ 3, provide a set of samples.

Handheld walkie-talkie 308:

1. Technical parameters:

Working frequency: 136-174, 350-390, 400-430, 440-480MHz

Up to 16 channels, switching channel sound prompts

Dumb audio and digital dumb audio for start-up and shared channel grouping

DTMF decoding can be used as selective call, automatic answer

Priority scan for multi-channel instant response

FleetSync digital communication is proposed as PTTID function and selective call function

Built-in VOX sound control launch operation for hands-free calling

Two programmable function keys, voice finishing function

Extra large speaker 500mW audio output

Extra large capacity battery, working time ≥12 hours

Comply with international protection standards such as IP54 and IP55

Weight: ≤360g (with battery)

★ 2, provide samples.

DC water gun 154:

★ 1, technical performance in line with the requirements of "fire water gun" GB8181-2005.

2. The DC switch water gun is the main equipment used by firefighters in fire fighting. It can convert the high-pressure water flow in the water belt into a high-speed jet of water gun, and spray the jet onto the objects in the fire field to achieve the purpose of fire extinguishing. Type 65 quick interface.

ABC dry powder fire extinguisher (greater than 4 kg) 770 cans:

★ 1, technical performance in line with the requirements of "Portable Fire Extinguisher" GB4351-2005, provide relevant test reports.

2, fire extinguishing agent: ABC dry powder, the amount of fire extinguishing agent is 4kg.

3, insulation performance ≥ 50000V

Strong light 154

1, using 3 nuclear LED lamp beads, life ≥ 10W hours;

2, completely in accordance with GB3836.1-2010 and 3836.4-2010 standard design;

3, long battery life, glare can reach 8 hours, weak light can take more than 15 hours;

4. Design of power indicator and low voltage warning function;

5, lithium ion battery;

6, high hardness alloy casing;

7. The charger uses a dedicated electric chip to control charging;

8, explosion-proof mark: ExibIIBT4, protection level: IP68;

9, head diameter: ≤ 70mm, tail diameter: ≤ 70mm

★10. Provide test reports and samples.

Water belt 1540:

1. Water-bearing belt interface. It complies with the standard of GB6246-2011 "Lined fire hose performance requirements and experimental methods". The water strip is printed on both sides of the center line near the end with the product name, design work pressure, specifications (nominal inner diameter and length), warp, weft and lining materials, manufacturer name, registered trademark, and production date. The fabric layer is evenly woven, the surface is neat, and there are no jump double diameter, broken double diameter, skipping and scratching. Uniform thickness, smooth surface, no wrinkles and other defects. Made of polyurethane material.

★ 2, technical parameters:

Inner diameter: 63.5mm

Length: 20m

Unit length weight: ≤ 274g

Burst pressure: ≥ 4.8MPa

Axial elongation: ≤5%

Diameter expansion rate: ≤5%

Adhesion strength: 55N/25mm

Elongation at break: ≥280%

Breaking strength: ≥12MPa.

★3. Provide national fire equipment quality supervision and inspection center inspection report and 3C certification.

154 two water separators:

1. Technical performance meets the requirements of GA868-2010.

2, divided into several branch lines, can be individually switched to control the flow of water or increase, decrease and exchange of the water line of the branch line. There are valve devices on the water outlet, which can be closed at any time to control the flow of water, which is convenient for adding and changing the water line of the branch line. Aluminum alloy, working pressure: 1.6mpa, 65mm inlet, 2 65mm outlets.

77 horizontal bar ladders:

★ 1, in line with GA137-2007 "fire ladder" standard requirements.

2. The main body is made of high-quality and tough bamboo, which is processed by special process and laminated. The side panels and ladders are connected by rivets, which can be used by firefighters to climb, cross high walls and use as temporary stretchers. It can also be used for general ascending and civil use. .

★ 3, technical parameters:

Working length: 3m;

Shrinkage width: 135mm;

Shrinkage thickness: 70mm;

Minimum ladder width: 250mm;

Step spacing: 340mm;

Horizontal bending residual deformation ratio: 0.10%;

Stepped bending residual deformation ratio: 0.2%;

Side rocking residual deformation ratio: 0.15%;

Weight: ≤ 8kg;

★4. Provide national fire equipment quality supervision and inspection center inspection report and 3C certification

Fire hydrant wrench 154 (77 fire hydrant wrenches and underground fire hydrant wrenches):

1, in line with GB4452-2011 "outdoor fire hydrant" standard.

2. The material is cast steel ZG310-570. It is used to unscrew the fire hydrant, and the design is novel and labor-saving.

Big axe 154 put:

Axe requirements: the length of the axe is 800-900mm, the axe is made of steel that meets the technical requirements, the fire axe handle should be made of hard wood, the moisture content is not more than 16%, and the hardness of the axe is HRC48-56. It can be used to clear fire or flammable materials, cut off the way the fire spreads, and also open the doors and windows that are burnt and deformed to rescue the trapped people.

Insulation shearing pliers 154:

1. The resistance voltage is above 5000 volts. It is used to cut off the power supply at the disaster site and avoid secondary accidents of inflammable and explosive materials. Using the principle of mechanical leverage, it combines shearing and insulation to prevent electricity. The product design is reasonable, the structure is unique, the carrying is convenient, safe, reliable, labor-saving and efficient.

★ 2, provide a sample.

Tie Ting 154:

According to the national standard configuration, it is used for disaster site demolition work materials: 45 manganese, six-ribbed, diameter 22 (mm), the shape of both ends is round and flat, the length is 1 meter, and the weight is ≤3KG.

Third, the product free warranty period: at least one year

Delivery time, location and acceptance method

1. Delivery time: The supply and acceptance will be completed within 30 calendar days after the contract is signed.

2. Place of delivery: Designated by the user when signing the contract.

3. Acceptance of goods

payment method:

After acceptance, 95% of the total contract amount will be paid, and the remaining 5% will be used as the quality guarantee. After one year of normal use of the equipment, there will be no quality problems and will be paid within 5 working days. (no interest)

Editor in charge: Lu Hao

Heavy Knit Top

Winter Warm Top,Heavy Knit Top,Lace Stitching Knit Top,Geometric Joining Knit Top

SHAOXING CHENYEE TEXTILE CO. LTD , https://www.fabriccy.com