The box type rain test box meets the IP3 and IP4 waterproof level test, and is mainly used for electrical and electronic products, lamps, electric cabinets, electrical components, automobiles, motorcycles and their parts and components under simulated rain conditions. Test the physical and other related properties of the product to determine whether the product meets the design requirements. The daily maintenance of the rain test chamber should be carried out in accordance with relevant standards and procedures, and should not be sloppy.
After the test, the studio should be cleaned as necessary, the studio should be rinsed with clean pure water, the surface of the cabinet should be wiped with a soft cloth, and the door should be closed after drying naturally.
Clean the power distribution cabinet and switchboard once a month. (Note: When doing this, please turn off the power to avoid short circuit or electric shock).
Clean the water system after the test.
Clean the surface of the box rain test box every week to slow down the equipment.
The box type rain test box will make an abnormal noise during the operation. Please stop the machine and check it again before restarting it, so as not to affect the service life of the equipment.
The transmission must be refueled regularly and the gear unit must be cleaned with oil.
After the equipment is in place, the support frame should be propped up to prevent the casters from being displaced by vibration during the test.
The box type rain test box runs for a long time. If the water spray hole is blocked, the pipe must be removed, rinsed with tap water and assembled (or with a needle).
Ladies Tops,Ladies Tops Shirts,100% Cotton Ladies Tops,Ladies Tops For Spring
Shaoxing Haisa Textile And Garment Co.,Ltd , https://www.haisafashion.com